SIP Startmaster T400 / 75W Battery Charger
SIP Startmaster T400 / 75W Battery Charger
Overview
- Tough, Reliable And Wheel Mounted
- 400 Amp Peek Start Current
- 12 / 24 Volt Charging Voltages
- Reverse Polarity Protection
- Short Circuit And Overloading Protection
SIP
Specification for SIP Startmaster T400 / 75W Battery Charger
| CABLE LENGTH | 2 Metres |
|---|---|
| CE APPROVED | Yes |
| DIMENSIONS PACKAGED | 340 x 300 x 510 mm (HxWxL) |
| GUARANTEE DOMESTIC | 12 Months |
| MADE IN | EU |
| MAX. CHARGING CURRENT | 75amp max / 400amp Start Current |
| PRODUCT ID NO | SIP05294 |
| RATED BATTERY CAPACITY | 20Ah |
| RATED CHARGE SETTINGS | 4 |
| VOLTAGE 50HZ | 12v/24v Charging Voltages / 230v (40amp) |
| WEIGHT | 23kg |
| WEIGHT PACKAGED | 25kg |
| WHEELS | Yes - Two |
| Availability | Usually Delivered Within 3 Days |
The SIP T400/75W battery charger is ideal for use in garages and workshops with its tough, reliable design. Mounted on 2 wheels with a handle to allow the user to move the charger around to where it is required. Requires a 230v (40amp) supply, this machine is fully protected against reverse polarity, short circuit and overloading. With a maximum 400 amp peak start current and 75 amp maximum charging current this machine is backed by a 12 month manufacturing warranty against any manufacturing defects this SIP starter charger is great value for money.
Charge Rate Settings - 4
Minimum Battery Capacity - 20 Ah
Degree Of Protection - IP20
*Please refer to your car manual to ensure you can connect your battery to the starter charger.
